 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-45380E(AT)
*
(Non-Government standards and other publications are normally available from the
organizations that prepare or distribute the documents. These documents also may be available
in or through libraries or other informationa1services.)
*
2.3 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
*
3.1 Standard vehic1e and accessories. Except as specified in 3.1.1 through 3.1.1.13, the
vehicle, components, assemblies, and accessories to be delivered under the contract shall be
standard or optional items, which meet or exceed the requirements of this specification. Except
as specified in 3.1.1 through 3.1.1.13, no removal, substitution or alteration of the chassis
manufacturer's standard or optional chassis model components shall be made. All chassis items
shall be as represented in the chassis manufacturer's technical data book. Special bodies or
mounted equipment shall be as represented in the body and equipment manufacturer's technical
data. Technical data shall be limited to specifications and technical material, identical to that
furnished to the authorized company representatives for selection of vehicle models and
components, and shall be available to the engineering office of the procuring activity prior to
delivery of the items. The chassis model furnished shall be not older than the chassis
manufacturer's current model on the date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and component specified
in 3.1, the vehicle shall be furnished with special equipment as specified herein.
*
3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance
with MIL-STD-1223. As specified by the procuring activity for the appropriate military service
(see 6.2), the exterior color shall be in accordance with MIL-STD-1223.
*
3.1.1.2 Markings and data plates. As specified by the procuring activity for the
appropriate military service (see 6.2), identification marking and data plates shall be in
accordance with MIL-STD-1223.
*
3.1.1.3 Rustproofing. When specified (see 6.2) the vehicle shall be rustproofed in
accordance with FED-STD-297. When specified (see 6.2), tropical rustproofing in accordance
with FED-STD-297 shall be furnished.
*
3.1.1.4 Drain plugs. Drain plugs installed in manual transmissions, transfer case and rear
axle shall be of the permanent magnet type.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals