 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-45380E(AT)
(f)
Replacement headlights, if required to be added, shall meet the height requirement
of not less than 22 inches and not more than 54 inches, measured above the road
surface, in conformance with Federal Motor Vehicle Safety Standard No. 108.
Replacement headlights shall be equivalent in mounting, protection, and range and
precision of adjustment to the chassis manufacturer's original standard headlights.
(g)
Unused headlight cavities are covered in a neat workmanlike manner treated and
painted to match the chassis cab color with treatment and painting equivalent to the
chassis cab manufacturer's process for the remainder of the chassis cab. Cavities
and their covers shall be rustproofed in accordance with 3.1.1.3.
(h)
Complete installation drawings are available to the procuring activity.
3.2 General design.
3.2.1 Federal Motor vehicle Safety Standards. The vehicle and furnished accessories
shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of
manufacture.
3.2.2 Air pollution control. The vehicle shall comply with the Environmental Protection
Agency regulations governing Control of Air Pollution from New Motor Vehicles and New
Motor Vehicles Engines in effect on the data of manufacture. In addition, vehicles destined for
California shall comply with State of California regulations governing air pollution control in
affect on the date of manufacture.
*
3.2.3 Sound level. The cab interior sound 1evel shall not exceed 84db(A) when
measured in accordance with Federal Motor Carrier Safety Regulation 393.94. The vehicle
exterior sound level shall conform to Environmental Action Agency Noise Emission Standards
for transportation Equipment, Medium and Heavy Trucks.
3.2.4 Curb weight. The curb weight shall include the weight of the chassis and cab, with
all attachments, accessories, and equipment; body; and full complement of fuel, lubricants, and
coolant.
3.2.5 Gross vehicle weight. The GVW shall consist of curb weight operator weight
(computed at 175 pounds), and a payload to provide not less than the specified GVW. A
vehicles with crew (four-door) cab shall have the GVW computed with 525 pounds of payload in
the rear seat.
3.2.6 Weight distribution. The distribution of the GVW for the purpose of establishing
suspension, axle, and tire capacities shall be determined with the payload uniformly distributed
over the load area.
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals