 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-45688D(MU)
4.2.2 Contractor testing.- When the contractor is responsible for
conducting first article approval tests,the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, including certificates of conformance
for materials, shall be submitted to the Government for approval. The
Government reserves the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of product.- Unless otherwise specified by the con-
tracting officer, inspection lot size, lot formation and presentation of
lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies.- All components and subassem-
blies shall be inspected in accordance with the inspection provisions
contained in Supplementary Quality Assurance Provisions (SQAP) listed in
the technical data package (TDP). In the absence of sQAp's, the appli-
cable Quality Assurance Provisions of MIL-F-13926 shall apply. Examina-
tion, and tests related to Section 3 herein shall be performed on a
single defect (individual characteristic) basis in accordance with MIL-
STD-105 and the sampling plans specified in Tables I, II and III herein.
Examination and tests for packaging, packing, and marking shall be in
accordance with MIL-P-14232 and Section 5 herein. The tabulated classi-
fication of defects in Table I, II and III shall constitute the minimum
inspection to be performed by the supplier after first article approval
and prior to Government acceptance or rejection by item or lot.
TABLE I - CLASSIFICATION OF DEFECTS
CLASS
REQUIREMENT
TEST PROCEDURE
CRITICAL: NONE
MAJOR : AQT. 0.65% Defective
101.
Vibration
3.5.3
4.6.3
102.
Sealing
3.6
4.6.5
103.
Interior atmosphere
3.6
4.6.6
104.
Cleanliness
3.7
4.6.7
105.
Collimation, elevation
4.6.8.1
3.8.2.1
106.
Collimation, deflection
3.8.2.2
4.6.8.1
107.
Collimation, coincidence of
4.6.8.2
3.8.3.2
retitles
Parallax
108.
3.8.3
4.6.8.3
Parallelism of reticle and image
3.8.4
109.
4.6.8.4
Reticle wander
110.
4,6.8.5
3.8.5
111.
Reticle lean
3.8.6
4.6.8.6
112.
Image tilt
3.8.7
4.6.8.7
Resolution
113.
3.8.8
4.6.9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals