 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-45688D(MU)
4.6.10
3.8.9
114. Eyepiece focus
4.6.11
3.8.10
115. Reticle accuracy
4.6.12
116. Operability, diopter adjustment 3.9.1
4.6.14
3.9.3
117. Operability, articulated joint
4.6.15
3.10
118. Reticle illumination
MINOR: None Defined
NOTE: The tests in Table I shall be conducted at a
temperature be-
tween +60 and +90F.
4.3.3 Acceptance and rejection.- Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units
and resubmittance of rejected lots shall be in accordance with "Accept-
ance and Rejection" as specified in MIL-STD-105.
4.4 Special sampling.
4.4.1 General.- Three telescopes shall be selected at random by a
Government representative as a special sample from each 100 produced.
The sample shall meet the requirements and tests in Table II.
TABLE II
TEST PROCEDURES
REQUIREMENTS
NO.
CHARACTERISTICS
Applicable drawings-
3.1
Fabrication
301.
Visual
MIL-F-13926 - Visual
3.2
General specification
302.
4.4.2 Environmental.- Three telescopes shall be selected at random
by a Government representative as a special sample from each 50 produced
or from each month's production, whichever occurs first. The samples The samples
shall have met the requirements and tests in Table III and shall then
meet the requirements and tests in Table I.
TABLE III
TEST PROCEDURES
REQUIREMENTS
NO.
CHARACTERISTICS
4.6.1
3.5.1
Storage temperature
303.
(-80F +160F)
4.6.2,
3.5.2,
Operability, diopter
304.
4.6.12
3.9.1
adjustment
4.6.2,
3.5.2,
Operability, reticle
305.
4.6.13
3.9.2
transfer lever
4.6.14
3.5.2, 3.9.3
Operability, articulated joint
306.
The tests for Characteristics 304 through 306 inclusive shall
NOTE:
be conducted at -40 and +150F.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals