 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46316B(MU)
4.2 First Article (Initial Production) Approval.- The requirement
for first article approval and the responsibility (Government or con-
tractor) for first article testing shall be as specified in the contract.
The sample for first article approval tests shall consist of 3 Elbow
Telescopes plus three (3) each of all items covered by SQAP. The sample
shall be manufactured in the same manner, using the same materials,
equipment, processes, and procedures as used in regular production. All
parts and materialsincluding packaging and packing, shall be obtained
from the same source of supply as used in regular production.
4.2.1 Government Testing.- When the Government is responsible for
conducting first article approval tests, the contractor, prior to sub-
mitting the sample to the Government, shall inspect the sample to insure
that it conforms to all the requirements of the contract and submit a
record of this inspection with the sample, including certificates of con-
formance for materials.
4.2.2 Contractor Testing.- When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, including certificates of conformance
for materials, shall be submitted to the Government for approval. The
Government reserves the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of Product.- Unless otherwise specified by the
contracting officer, inspection lot size, lot formation and presentation
of lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies.- All components and subassem-
blies shall be inspected in accordance with the inspection provisions con-
tained in Supplementary Quality Assurance Provisions (SQAP) listed in the
List of Inspection Documents (IEL), when provided with the technical data
package (TDP). In the absence of SQAP'S, the applicable Quality Assurance
Provisions of MIL-F-13926 shall apply.
4.3.2.2 Final acceptance inspection.- Subsequent to first article
approval, examination and tests related to Section 3 herein shall be
performed on a single defect (individual characteristic) basis in accord-
ance with MIL-STD-105 and the sampling plans specified in Table I herein.
Examination and tests for Packaging, Packing and Marking shall be in
accordance with MIL-P-14232 and Section 5 herein. The tabulated classifi-
cation of defects in Table I shall constitute the minimum inspection to
be performed by the supplier after first article approval and prior to
Government acceptance or rejection by item or lot.
5.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals