 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46316B(MU)
TABLE I - CLASSIFICATIONS
TEST PROCEDURE
REQUIREMENT
CHARACTERISTICS
CRITICAL 100%
4.7.2.10
3.5
1.
Sealing
4.7.2.10.1
3.5
2.
Internal pressure
MAJOR 1.5% DEFECTIVE
4.7.2.1
3.7.1
101.
Collimation
4.7.2.1
102.
Repeatability (When alternate
3.7.2
reticle is required)
3.4
4.7.2.1
103. Cleanliness
4.7.2.2
3.3.3
104. Vibration
4.7.2.3
105. Post Collimation
3.7.1
106. Repeatability when alternate
4.7.2.3
3.7.2
reticle is required (Post
vibration)
4.7.2.3
107. Cleanliness (Post vibration)
3.4
4.7.2.4
3.7.5
108. Boresight error due to reticle
rotation
4.7.2.5
3.7.6
109. Eyepiece focus
110. Parallax
4.7.2.7
3.7.8
111. Parallelism of image and reticle
4.7.2.6
3.7.3
4.7.2.9
112. Resolution
3.7.7
113. Reticle accuracy
4.7.2.8
3.7.4
114. Torque (Cant correction knob
4.7.2.11
3.9.1
(60 -90) )
115. Torque (Reticle shift lever
3.9.2
4.7.2.11
(60 -900))
116. Torque mirror, plunger arm and
4.7.2.11
3.9.3
rheostat 60 -90
117. Illumination (level vial)
4.7.1
3.8.1
118. Illumination (reticle)
3.8.2
4.7.1
119. Insulation resistance
4.7.2.12
3.10
MINOR: NONE
4.3.3 Acceptance and relection.- Rejected lots shall be screened
for all defective characteristics. Removal or correction of defective
units and resubmittance of rejected lots shall be in accordance with
"Acceptance and Rejection" as specified in MIL-STD-105.
4.4 Special sampling for environmental testing.
4.4.1 Samples shall be selected from lots at random using inspection
level S-3 Table I of MIL-STD-105. Acceptance or rejection of the lot
shall be in accordance with AQL 2.5 of Table II-A of MIL-STD-105. The
samples shall have met all the requirements and tests outlined in Table I
prior to being subjected to the following examination and test.
6.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals