 |
|||
|
Page Title:
Rod, Piston, Drawing 8594494, covering a detail of Drawing 10522631 |
|
||
| ||||||||||
|
| MIL-T-46583C
characteristic shall be measured or gaged to determine acceptability. All nonconforming material shall be
rejected.
4.5.2.1 Rod, Piston, Drawing 8594494, covering a detail of Drawing 10522631.
Characteristics
Defect
Method of Inspection
Critical
None defined
Major
101
Concentricity of ring groove with large body diameter
Gage
102
Concentricity of body midsection with large body diameter
Gage
103
Concentricity of cavity with pilot diameter
Gage
104
Concentricity of key locking groove with pilot diameter
Gage
105
Concentricity of key escape groove with pilot diameter
Gage
106
Concentricity of pilot with large body diameter
Gage
107
Concentricity of body at rear of ring groove with large body
diameter
Gage
108
Diameter of ring groove
Gage
109
Diameter of large body, min
Gage
110
Diameter of body of ring groove
Gage
111
Diameter of body midsection
Gage
112
Diameter of key escape groove, max
Gage
113
Diameter of key locking groove, min
Gage
114
Diameter of pilot, min
Gage
115
Diameter of cavity
Gage
116
Depth of cavity, max
Gage
117
Length from face, pilot end, to end of key escape groove
Gage
118
Length from face, pilot end, to start of key escape groove
Gage
119
Length from face, pilot end, to angle between body and
midsection, min
Gage
120
Location of key groove
Gage
121
Profile of key groove
Gage
122
Profile of ring groove
Gage
123
Metal defective
Visual
124
Protective finish inadequate or defective
Visual
125
Surface finish of pilot, key locking groove, and large
body improper
Visual
126
Burr or sharp corner
Visual
127
Foreign matter
Visual
Minor
201
Diameter of large body, max
Gage
202
Diameter of key escape groove, min
Gage
203
Diameter of key locking groove, max
Gage
204
Diameter of pilot, max
Gage
205
Depth of cavity, min
Gage
206
Length of pilot
Gage
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals