30 April 1993
28 January 1975
THRUSTER, CARTRIDGE ACTUATED, M15 METAL PARTS ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.1 Scope. This specification covers the requirements for the M15 Cartridge Actuated Thruster Metal
Parts Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and standards form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those
listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and
supplements thereto, cited in the solicitation (see 6.2).
Ammunition, General Specification For
Welding of Aluminum Alloys: Process for
Sampling Procedures And Tables For Inspection By Attributes
Quality Assurance Terms And Definitions
Visual Inspection Guide for Elastomeric O-rings
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this
document should be addressed to: Commander, Indian Head Division, Naval Surface Warfare Center, Standardization
Branch (Code 8420), 101 Strauss Avenue, Indian Head, MD 20640-5035, by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or by sending a letter.
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
(Unless otherwise indicated, copies of federal and military specifications and standards are available from
Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)