 |
|||
|
|
|||
| ||||||||||
|
| MIL-T-46692B
5.1 Packing and marking. Packing and marking shall be Level A or B, as specified by the
contracting activity (see 6.2). Level A shall be in accordance with Drawings 8845244 and 8845243.
Level B shall be in accordance with Drawings 8845244 and 9217557.
5.1.1 Lot numbers. Lot numbers shall be in accordance with MIL-STD-1168.
5.2 Air Force packaging. Air Force packaging shall be in accordance with TPO 00-849-0214.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful but
is not mandatory.)
6.1 Intended use. The thruster assembly is used in conjunction with other propellant actuated
devices in Aircrew Emergency Escape Systems.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and revision letter of this specification
b. Issue of DODISS to be cited in the solicitation and, if required, the specific issue of
individual documents referenced (see 2.1.1 and 2.1.2)
c. Production test activity and lot size (see 4.1 and 4.2.1)
d. Directions for shipping radiographs of entire production lot along with ballistic
sample to the activity conducting production lot acceptance tests (see 4.3.3)
e. Level of packing and marking (see 5.1)
f. That the safety precaution requirements of the ``Contractor's Safety Manual for
Ammunition, Explosives, and Related Dangerous Material,'' DOD 4145.26M are applicable.
NOTE: When this specification is used as part of the description of work to be
accomplished by a Government activity, the safety precaution requirements of
``Ammunition and Explosives Ashore,'' OP 5 are applicable.
6.3 Load firing. The expected performance of the thruster, under conditions simulating those
existing in aircraft, is obtained when the thruster satisfactorily meets the conditions of the
"load" firing.
6.4 Hazard notice. The thruster described herein and certain of its components are flammable,
toxic, or explosive and present hazards in manufacture, handling, storage, and shipment. The
contractor should recognize these properties and take appropriate measures to guard and protect
against fire, explosion, adverse environment, corrosive atmosphere, rough handling, and
electrically induced incidents.
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals