 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46705E
3.1.1.8 Wood treatment. Wood, including apitong, shall be treated with wood preservative
in accordance with MIL-STD-1223.
3.1.1.9 Lunette. The trailer shall be equipped with a lunette conforming to MS 51336
and 3.11.
* 3.1.1.10 Pintle. A pintle conforming to MS 51335-2 shall be furnished. Mounting shall
include reinforcement to transfer pintle loads directly to the vehicle frame. The rearmost portion
of the installed pintle shall not more than 100 millimeters (mm) (4 inches) forward of the
rearmost part of the vehicle. Two trailer safety chain attachment devices, one adjacent to each
side of the pintle, shall be provided. Each attachment device shall provide an ultimate strength at
least equal to the curb weight of the trailer plus the rated payload capacity of the trailer. The
attachment devices shall be capable of accommodating a standard grab hook [56 mm
(2-3/16 inches) wide, 18.7 mm (47/64 inch) thick and 12.3 mm (31/64 inch) throat width] for a
9.5 mm (3/8 inch) chain.
3.2 General design.
3.2.1 Federal Motor Vehicle Safety Standards. The vehicle and furnished accessories shall
comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture.
* 3.2.2 OSHA and FMCSR regulations. The vehicle, with all furnished attachments,
accessories and equipment, shall enable compliance by any user with all OSHA and FMCSR
user regulations that are vehicle or vehicle equipment dependent. Regulations shall be those that
are applicable to a commercial user of such a similar type, class and size of semitrailer for the
same general use. See 6.1.
3.2.3 Ratings. Vehicle ratings shall be the manufacturer's published rating, component and
vehicular ratings shall not be raised to meet the requirements of this specification. When
published ratings are not available, verification of ratings shall be available to the engineering
office of the procuring activity.
* 3.2.4 Dissimilar metals. All dissimilar metals used throughout the vehicle shall be insulated
from one another to prevent galvanic or electrolytic action.
* 3.2.5 Prohibited materials. Asbestos materials shall not be used in any form in any part of
the vehicle. No item, part or assembly shall contain radioactive materials in which the specific
activity is greater than 0.002 microcurie per gram or activity per item equals or exceeds
0.01 microcuries.
* 3.2.6 Accessibility. The design of the vehicle and optional equipment shall permit access for
routine servicing and shall permit access for replacement and adjustment of component parts and
accessories with minimal disturbance of other components and systems.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals