 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46780D(AT)
4.3.1.12 Cramping angle check. To determine conformance to 3.4.9 during testing each
vehicle shall be cramped as specified and checked for performance specified.
4.3.1.13 Dump truck check. To determine conformance to 3.4.12, the hydraulic system
shall be operated as specified and checked for functional requirements.
4.3.1.14 Drop side cargo body check. To determine conformance to 3.4.13, the sides and
tailgate shall be checked for completeness of assembly, proper mounting, and locking.
4.3.1.15 Winch check. To determine conformance to 3.4.14, the winch and controls
shall be checked for completeness and proper installation.
4.3.1.16 Wheel balance check. To determine conformance to 3.4.15, the front wheels
shall be checked for balance.
4.3.1.17 Wood treatment check. To determine conformance to 3.5, all wood used in
manufacturer of vehicles shall be checked for meeting the specification requirements.
4.3.1.18 Undercoating check. To determine conformance to 3.6, undercoating shall be
as specified.
4.3.1.19 Painting, marking and data plate check. To determine conformance to 3.7.1
through 3.7.3, the painting marking and data plates shall be as specified or as specified by the
procurement document.
4.3.1.20 Servicing adjustment and cleaning check. To determine conformance to 3.8,
servicing and adjustments shall be checked for requirements specified, including all stowed
material (OVM), as specified in contract and vehicle completely cleaned. On fuel servicing
vehicles the tank body piping and components shall be cleaned by flushing as specified.
4.3.1.21 Fuel dispensing filter separator system check (M49A2C). To determine
conformance to 3.4.10, the fuel dispensing filter separator system shall be operated (with or
without filtering elements and fuses) using number 1 diesel oil or solvent conforming to
P-D-680, and checked for functional requirements (less fuel cleanliness check). When filtering
elements and fuses are used in checking, they shall be replaced with new elements and fuses
(slave filters may be sued) after completion of test. The dump valve shall be checked for proper
operation.
4.3.2 Control tests. One of the first ten production vehicles of each model, and one per
month thereafter, selected by the Government, shall be operated at the place of manufacturer for
a distance of not less than 50 miles on hard surfaces roads with designated or simulated highway
payload.
35
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals