 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46780D(AT)
6.7 Drawings. Drawings D 8154-1 thru -22 and D 4699-1 thru -3 depicting the body,
accessories, and installation on the M45A2 truck chassis (modified) are Corps of Engineers
design drawings and are not intended for use as shop drawings. Critical dimensions and
tolerances are furnished; however, the contractor is responsible for preparing his own
manufacturing drawings. Where tolerances are not shown or where those prescribed could
cumulatively result in improper fits, the contractor is responsible for providing tolerance in
accordance with MIL-STD-8 for the various machining operations to insure proper fit, assembly
and operation of equipment and accessories of the body. No deviation from dimensions shown
on the Corps of Engineers design drawings is permissible without prior approval of the
contracting officer. All parts, sub-assemblies and assemblies requiring identification shall be
identified in accordance with MIL-STD-130.
6.8 Oils. Unless otherwise specifically directed by Contracting Officer, the engines shall
be serviced with oil conforming to grade 30 of MIL-L-45199 for period between 1 April to
31 October and the engines shall be serviced with oil conforming to MIL-L-45199 except the
grade shall be SAE 20 for period between 1 November to 31 March.
Custodian:
Preparing activity:
Army - AT
Army - AT
Project No. 2320 - A843
46
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals