Click here to make tpub.com your Home Page

Page Title: Packaging inspection
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Table III. Temperature Cycle (cont.)
Up
Telescope, Panoramic: M137 and M137A1
Next
Submission of designs for approval



img
MIL-T-48554A(AR)
in the closed position. Pressurize the telescope's counterbox
assembly with dry nitrogen as specified in 3.7.2. The accuracy of
the test equipment used for this pressure test Drawing 8565556.
4.11.3 Purging assembled telescope. Connect the test
equipment to the purging valve of the telescope. Adjust the dry
nitrogen pressure to the pressure specified in 3.8.2. The
pressure is to remain constant until the dew point of the emergent
0
gas is no higher than -25 F. Disconnedt the purging apparatus
when the relief valve has reseated to maintain an internal
pressure of 3.8.3.
4.12 Packaging  inspection. The preservation, packing, and
marking shall be inspected to verify conformance to the
requirements of 5.1.
5.
PACKAGING
5.1 Packaging,  packing,  and  marking. Packaging, packing and
marking shall be in accordance with MIL-P-14232 and the Packaging
Data Sheet 11741101, 1.2599167 or 12599209 as applicable. The
level of protection shall be as specified in the procurement
document.
6.
NOTES
(This section contains information of a general or
explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended  use. he Panoramic Telescope, M137 and M137A1,
when mounted on their respective telescope mounts are primarily
intended to lay the howitzer in azimuth for indirect fire.
requirements. Provurement data should
6.2 Acquisition
specify the following:
a.
Title, number and date of this specification.
b.
Selection of an applicable level of preservation,
packaging, and packing.
c.
Applicable packaging data sheet number (See 5.1).
d.
Applicable stock number.
e.
Provisions for First Article Testing.
f.
Reliability Assurance Sample.
g.  Contract data requirements for submission of inspection
equipment designs conforming to Data Item Description DI-R-1714.
(See 6.3.1.)
24

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +