 |
|||
|
|
|||
| ||||||||||
|
| MIL-T-50713A
4.3.2 Examination. On reprocessed parts, one hundred percent examination shall be performed
for all critical defects. Examination for major and minor defects shall be performed on a defect
basis in accordance with the classification of defects. Four power (4x) magnification may be used
in performing visual examination for such defects as burr and foreign matter. Inspection for
rubber O-rings shall be in accordance with MIL-STD-413. When compliance with the applicable
requirement is in doubt as a result of visual examination, the characteristic shall be measured
or gaged to determine acceptability. All nonconforming material shall be rejected.
4.3.2.1 Examination of reclaimed parts. Examination of reusable parts, which require no
reprocessing, shall be limited to inspection of defects that require visual type inspection. One
hundred percent examination shall be performed for all such defects. All nonconforming parts
shall be reprocessed or rejected.
4.3.2.2 Piston, Drawing 10534181, covering a detail of Drawing 11730535.
Characteristics
Defect
MethodofInspection
Critical
None defined
Major
101 Threads damaged or not fulilsual
V
102 Metal defective
Visual
103 Protective finish inadequate or defective
Visual
104 Burr or sharp corner
Visual
105 Foreign matter Visual
Minor
201 Depth of threaded holes Gage
202 Radius or chamfer incorrect
Gage
203 Radius or chamfer missing Visual
204 Surface finish improper
Visual
4.3.2.3 Body Assembly, Drawing 10534179, covering a detail of Drawing 11730535.
Critical
None defined
Major
101 Metal defective
Visual
102 Protective finish inadequate or defective
Visual
103 Burr or sharp corner
Visual
104 True position of slots
Gage
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals