 |
|||
|
|
|||
| ||||||||||
|
| MIL-T-50777A(OS)
5.2 Marking. Shipping containers shall be marked with the name of the material, specification
number, temper, size of tubing, quantity contained therein, name of manufacturer, name of
contractor (if not the same as manufacturer), number of the contract or order, and gross weight.
Any additional marking shall be in accordance with MIL-STD-129.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful but is
not mandatory).
6.1 Intended use. The tubing is intended for use in propellant actuated devices used by
military aircraft personnel in emergency escape systems.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this specification.
b. Issue of DODISS to be cited in the solicitation, and if required, the specific issue of
individual documents referenced (see 2.1.1 and 2.2).
c. Inside and outside dimensions of the tubing required.
d. Pressure test, if required.
e. Packing and marking, if other than as specified in section 5.
6.3 Definition.
6.3.1 Wall thickness tolerance. Wall thickness tolerance is the difference between the
thickness of the wall at any point and the mean wall thickness.
6.4 Changes from previous issue. Asterisks are not used in this revision to identify changes
with respect to the previous issue due to the extensiveness of the changes.
6.5 Subject term (key word) listing.
Emergency escape systems, aircrew
Ejection systems, aircrew
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals