Click here to make tpub.com your Home Page

Page Title: Interior lighting
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-52843C
3.24.4.3 Interior lighting. The truck shall be equipped with gauge
lighting or indicators which are readily visible to the full range of
user personnel and shall be adequately lighted for night operation.
Interior lights, gauges and instruments, to include warning lights,
shall not emit energy out of the 400-625 nanometer wavelength range.
3.25 Horn. The forklift shall be equipped with an electric, air,
or air-over-electric horn. The horn shall sound with levels at least
20dB above truck noise. The horn button assembly and electrical
wiring for the horn shall be constructed to be moisture and weather
resistant to prevent entry of moisture when operated or stored
outdoors under all weather conditions. The horn button shall be
mounted on the steering wheel.
3.26 Pintle hook and towing lugs.
3.26.1 Pintle hook assembly. A rear mounted swivel pintle hook
assembly conforming to MS51118 shall be provided. The pintle hook
assembly shall be located on the vertical center line of the truck
with a minimum height of 31 inches and a maximum height of 39 inches.
The pintle hook assembly mounting shall be of sufficient strength to
withstand, without permanent deformation or damage, the drawbar pull
induced when the pintle hook assembly is restraining forward motion
at transmission stall.
3.26.2 Towing lugs. Two vehicular towing lugs, conforming to
MS500004, 10-50 tons, shall be furnished and shall provide clearance
to connect a towbar conforming to MS 500048, medium duty capacity.
The lugs shall be installed between 17 to 21 inches on each side of
the truck center line, on the rear of the truck.
3.27 Personnel cab. The forklift shall be equipped with an
insulated, weathertight personnel cab, which may be combined with
ROPS and FOPS specified in 3.5.1. The cab space envelope shall be in
accordance with SAE J154. The seated operator clearance dimensions
shall be based upon a 95 percentile U.S. male wearing arctic gear and
safety helmet. The cab shall withstand all operational shock and
vibration without deformation or damage under operating conditions
specified herein. The cab shall be constructed of metal or fiberglass
and shall be equipped with a minimum of one door and another
emergency exit (either door or window that can be opened) on the
other side of the cab. All doors shall have closing latches, opening
stops and hold-open catches. The doors shall either slide and latch
at each end of travel or shall swing open a minimum of 90 degrees and
latch open except that if a split door is furnished, only the top
half must latch open. All hardware shall be of the heavy-duty-truck-
or industrial-type, resistant to corrosion. Front rear window
defrosters, operating in conjunction with the heater blower (see
3.27.4), or not less than two minimum 6-inch diameter, ventilation
fans, shall be furnished. The fans shall be directionally adjustable
36

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business