 |
|||
|
Page Title:
Dimensions, weight fork reach and lift height |
|
||
| ||||||||||
|
|  MIL-T-52843C
4.6.2.3 Dimensions, weight fork reach and lift height Determine
.
the axle-spacing, height, width, and length of the complete forklift
in accordance with SAE J1234. Height shall be measured with the forks
resting on the ground. Weigh the complete forklift fully fueled and
serviced without load (see 6.10.3). Obtain for use in calculating the
flotation index. Determine the fork reach lift height and low
engagement height in accordance with test method No. 1.
Nonconformance to 3.1.2.1, 3.1.2.2, 3.1.2.3, 3.1.2.4, 3.9.11, 3.9.12
and 3.9.13 shall constitute failure of this test.
4.6.2.4 Lifting speed and lowering speed Test the forklift in
.
accordance with test method No. 2. Nonconformance to 3.9.6 or 3.9.7
shall constitute failure of this test.
4.6.2.5 Curb clearance circle. Determine the curb clearance circle
as defined in field test procedure of SAE J695 with the forks in
carry position. Nonconformance to 3.9.8 shall constitute failure of
this test.
4.6.2.6
Travel speed. Test the forklift in accordance with test
method No.
3. Speeds not as specified in 3.9.4 shall constitute
failure of
this test. Inability to shift as specified in 3.11.1 shall
constitute
failure of this test.
4.6.2.7 Underclearance, angles of approach, and departure Test
.
the forklift in accordance with test method No. 4. Nonconformance to
3.1.2.5 shall constitute failure of this test.
4.6.2.8 Tilt, tilt speed, tilt cavitation. Test the forklift in
accordance with test method No. 5. Nonconformance to 3.9.9 or 3.13
shall constitute failure of this test.
4.6.2.9 Drift. Test the forklift in accordance with test method
No. 6. Nonconformance to 3.9.14 shall constitute failure of this
test.
4.6.2.10 Gradeability, emergency and parking brake Test the
.
forklift in accordance with test methods No. 7 and 8. Inability of
the forklift to operate on slopes as specified in 3.9.1.2, 3.9.3, and
3.18.2 or inability of the brakes to stop and hold the forklift shall
constitute failure of this test.
4.6.2.11 Static stability. Test the forklift in accordance with
test method No. 9. Nonconformance to 3.9.1.1 shall constitute failure
of this test.
6.2.12 Steering.
4.6.2.12.1 Obstacle course No. 1. Test the forklift in accordance
with test method No. 10, 3a and 3b. Inability of the forklift to
56
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals