Click here to make tpub.com your Home Page

Page Title: Inspection of packaging
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-52843C
by the contractor at no cost to the Government on forklifts
previously accepted and produced under the contract. Any deficiencies
found as a result of the inspection comparison will be considered
prima facie evidence that all forklifts accepted prior to the
completion of inspection comparison are similarly deficient unless
evidence to the contrary is furnished by the contractor and such
evidence is acceptable to the contracting officer.
4.8 Inspection of packaging. The preservation, packing, and
marking of the forklift truck shall be inspected as specified in
Appendix B of MIL-STD-162.
5. PACKAGING
5.1 Preservation, packing and marking Each forklift truck shall
.
be preserved, packed and marked in accordance with the requirements
of MIL-STD-162 for type I mobile shipment. For all degrees of
preservation, liquid cooling systems shall be preserved by filling
the system with equal parts of water and antifreeze conforming to
MIL-A-46153. The degree of preservation shall be level A, B, C or
commercial; and the degree of packing shall be level A, B, or
commercial as specified (see 6.2). Commercial preservation and
packing shall be in accordance with ASTM D 3951.
6. NOTES
6.1 Intended use. The forklift is intended for use as a materials
handling forklift with a capability of unloading, transporting, and
loading boxes, containers, palletized ammunition loads, and MLRS
pods. The mobility of the forklift, with and without payload, is
intended to cover working areas where high flotation and traction
characteristics are required.
6.2 Ordering data. Procurement documents should specify the
following:
a. Title, number, and date of this specification.
b. Date of issue of DoDISS applicable and exception thereto
(see 2.1.1).
c. When first article tests are not required (see 3.2.1).
d. Time frame required for submission of the first-article
model and number of forklifts required (see 3.2.1).
e. When the Government will conduct any or all of the first
article examination and tests. When the Government will
conduct some but not all of the first article model
examination and tests, the contracting officer should
specify time frame and which examination and tests will be
conducted by the Government, and which examination and tests
shall be conducted by the contractor (see 3.2.1).
f. When additional or specific information is required on
plates (see 3.32).
64

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business