 |
|||
|
Page Title:
Test Method No. 9 Static Stability |
|
||
| ||||||||||
|
| MIL-T-52843C
APPENDIX
TEST METHOD NO. 9
STATIC STABILITY
1.
TEST COURSE:
The test course shall be a hard, level surface with provision
for anchoring the forklift to prevent overturning.
2.
TEST PROCEDURE:
a. Anchor the-rear of the forklift with a device with enough
slack to allow the forklift to tip but not overturn.
b. Steer forklift to maximum steer angle.
c. Apply 1.5 times the rated load, at the specified load center,
to the forks with the forks horizontal, centered on the
carriage, and at the maximum forward position (with respect to
the chassis) in the lifting arc.
d. Repeat "c" above with the forklift at the opposite maximum
steer angle.
77
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals