 |
|||
|
|
|||
| ||||||||||
|
| MIL-T-52843C
APPENDIX
TEST METHOD NO. 28 (CONT'D)
h. Start the forklift. Starting should be accomplished within 5
minutes of the initial attempt. Smooth engine running without
unnatural or continued control manipulation, and without use
of primers and priming fluids, should be obtained within 15
minutes after starting.
i. When started, run engine 15 minutes. After completion of the
15-minute operation, operate the engine as follows:
(1) 10 minutes idling.
(2) 10 minutes half throttle.
(3) 5 minutes full throttle.
Perform the 25-minute cycle three times.
j. Maintain and record temperatures prior to engine starting,
immediately after engine starting, and at 10 minute intervals
during warmup and cycling, at the following (but not limited
to) locations on the forklift:
(1)
Battery (unless sealed maintenance-free batteries are
furnished).
(2)
Hydraulic tank.
(3)
Engine oil.
(4)
Engine coolant.
(5)
Chamber air.
k. During engine cycling, and while wearing arctic mittens and
boots, the operator shall perform each of the following:
(1)
Engage and disengage power train to the wheels in all
gears.
(2)
Operate through two complete movement cycles all brakes,
shafts and cylinders (as permitted by space limitations in
chamber).
(3)
Mount to and dismount from the operator's position on the
forklift.
99
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals