Click here to make tpub.com your Home Page

Page Title: Aisle width
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-53019(ME)
3.21.9  Aisle width.  The forklift, with a 20 foot long, 43 inch wide, 43
inch high, 6000 pound capacity load on the forks shall be capable of operating
in a 89 inch wide aisle to insure the loading and unloading of stacked
containers etc., with the close quarters area.
3.21.10
Stability.
Truck shall conform to the stability requirements as
follows:
Operating as Counterbalanced
Operating as Counterbalanced
Front Loader
Front/Side Loader
Platform Slope Value
Platform Slope Valve
Test (Stability)
%
Test (Stability)
%
Long.  Stacking
4
Long.  Stacking
4
Long.
Travel
24
Long.
Travel
24
Lat.
Stacking
6
Lat. Stacking (RH)
6
Lat. Stacking (LH)
6
Lat.
Travel
ANSI B56.1
Lat. Travel
ANSI B56.1
3.21.11  Productivity.  The forklift, with fully charged battery, shall
operate for 30 cycles as specified in 4.4.11 without degrading the travel
speed below 2 miles per hour or the lift speed below 20 feet per minute with
the rated load on the forks.
3.22  Treating and painting .  The portions of the forklift normally painted
shall be cleaned, treated, and painted in accordance with MIL-T-704, forest
green.  If another color is specified (see 6.2), the above system shall be
overtreated with MIL-C-46168 of the desired color.
3.23  Identification marking .  Each forklift shall be identified with an
identification plate conforming to MIL-P-514, type 1, style 1, composition C,
of type 1, grade A, class 1 materiel.  The plate shall be located in a visible
and permanment location.  The identifying data shall be stamped in letters in
accordance with MIL-P-514.  The plate shall be securely attached to the
forklift with screws, bolts, rivets, or by welding.  The plate shall be
furnished and mounted by the contractor.
3.23.1  Forklift marking .  Markings shall be painted black.  Characters
shall be block-type capitals and Arabic numerals.  Location, information and
character size shall be as follows:
Minimum Character
Information
Example
Location
Size (Ht.)
Agency
US
On each side and rear
1-1/2 inches
Registration
10D315
On each side and rear
1-1/2 inches
Number
Capacity
6000 lb. cap
On each side
2 inches
Safety
No smoking
On rear of mast
1 inch
No riders
On rear of mast
1 inch
9

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business