 |
|||
|
Page Title:
Trunnion, Drawing 8594482, covering a detail of Drawing 11730535 |
|
||
| ||||||||||
|
| MIL-T-60561B
118
Protrusion of pellet, max
Gage
119
Straightness of cavity
Gage
120
Width of groove
Gage
121
Profile of groove
Gage
122
Thread damaged or not full
Visual
123
Metal defective
Visual
124
Protective finish inadequate or defective
Visual
125
Surface finish of cavity improper
Visual
126
Burr or sharp corner
Visual
127
Foreign matter
Visual
128
Pellet missing, loose, or improperly seated
Visual
Minor
201
Pitch diameter of thread, max
Gage
202
Diameter of cavity, min
Gage
203
Diameter of large counterbore
Gage
204
Diameter of body, max
Gage
205
Width of flat at threaded face
Gage
206
Thickness of wall
Gage
207
Length from end to shoulder of large counterbore
Gage
208
Length from end to large shoulder of small counterbore
Gage
209
Total length
Gage
210
Width across flats
Gage
211
Depth of slots
Gage
212
Width of slots
Gage
213
Location of pellets from tapered face
Gage
214
Length from front tapered face to exterior shoulder
Gage
215
Diameter of pellet hole
Gage
216
Depth of pellet hole
Gage
217
Bottom of pellet hole not flat
Gage
218
Width of thread undercut, max
Gage
219
Width of interior undercut, max
Gage
220
Length from end to inside front face of bore
Gage
221
Diameter of exterior shoulder
Gage
222
Width of exterior shoulder
Gage
223
Location of undercut from shoulder
Gage
224
Location of flats incorrect
Gage
225
Pellet protrusion beyond major thread diameter, max
Gage
226
Radius or chamfer incorrect
Gage
227
Radius or chamfer missing
Visual
228
Surface finish improper, except as otherwise specified
Visual
229
Marking missing, incorrect, or illegible
Visual
4.5.2.4 Trunnion, Drawing 8594482, covering a detail of Drawing 11730535.
Critical
None defined
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals