 |
|||
|
Page Title:
Ring, Drawing 10534183, covering a detail of Drawing 11730535 |
|
||
| ||||||||||
|
| MIL-T-60561B
103
Concentricity of cavity with large outside diameter
Gage
104
Concentricity of small diameter at cavity end with large
outside diameter
Gage
105
Concentricity of immediate diameter at cavity end with
large outside diameter
Gage
106
Concentricity of large diameter at cavity end with large
outside diameter
Gage
107
Diameter at large end, min
Gage
108
Diameter of groove, min
Gage
109
Length from face at cavity end to taper, max
Gage
110
Depth of cavity
Gage
111
Width of groove, max
Gage
112
Profile of groove
Gage
113
Chamfer improper or incorrect
Visual
114
Protective finish inadequate or defective
Visual
115
Burr or sharp corner
Visual
116
Foreign matter
Visual
Minor
201
Diameter of large end, max
Gage
202
Diameter of groove, max
Gage
203
Diameter of body
Gage
204
Diameter of cavity
Gage
205
Small diameter at cavity end
Gage
206
Immediate diameter at cavity end
Gage
207
Large diameter at cavity end
Gage
208
Diameter of drill point, max
Gage
209
Angle at tapered surface
Gage
210
Width of groove, min
Gage
211
Thickness of lip
Gage
212
Length from face at cavity end to taper, min
Gage
213
Total length
Gage
214
Length from front face to body
Gage
215
Location of groove
Gage
216
Length from face of cavity end to body
Gage
217
Radius or chamfer missing, except as specified
Visual
218
Marking missing, incorrect, or illegible
Visual
219
Surface finish improper
Visual
4.5.2.12 Ring, Drawing 10534183, covering a detail of Drawing 11730535.
Critical
None defined
Major
101
Concentricity of exterior diameter with internal diameter
Gage
102
Concentricity of small holes
Gage
103
Concentricity of center bore with small holes
Gage
14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals