|
| MIL-T-60561B
104
Chamfers at exterior and interior surfaces
Visual
105
Protective finish inadequate or defective
Visual
106
Burr or sharp corner
Visual
107
Foreign matter
Visual
Minor
201
Diameter at exterior surface
Gage
202
Diameter at interior surface
Gage
203
Diameter of holes
Gage
204
Diameter of counterbore
Gage
205
Depth of counterbore
Gage
206
Length from front face to rear face
Gage
207
Location of holes
Gage
208
Radius or chamfer incorrect
Gage
209
Radius or chamfer missing
Visual
210
Surface finish improper
Visual
211
Marking missing, incorrect, or illegible
Visual
4.5.2.13 Assembly, Drawing 11730535, less all components except 10521616, 8593864, and
MS29513-12.
Critical
1
Firing pin protrusion
Gage
Major
101
Any part missing
Visual
102
Protective finish inadequate or defective
Visual
103
Burr
Visual
104
Foreign matter
Visual
Minor
None defined
4.5.2.14 Assembly, Drawing 11730535.
Critical
None defined
Major
101
Trunnion not free to rotate 360 degrees
Manual
102
Any part missing, except as otherwise classified
Visual
103
Improper assembly
Visual
104
Thread damaged or not full
Visual
105
Marking missing,incorrect, or illegible
Visual
106
Burr
Visual
107
Foreign matter
Visual
15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |