available to the Government, at the point of final acceptance, records acceptable to the
Government indicating that the servicing and adjusting required by 3.4.24 have been
5. PREPARATION FOR DELIVERY
5.1 Vehicle processing. The vehicle shall be processed for shipment, from the
manufacturer's plant to initial receiving activity, in accordance with the manufacturer's standard
6.1 Intended use. The vehicle covered by this specification is intended for general
administrative use for cleaning sewers with water at high pressure.
6.2 Ordering data. Acquisition documents should specify the following:
Title, number, and date of this specification.
Issue of DODISS to be cited in the solicitation and if required, the specific issue of
individual documents referenced (see 2.1.2 and 2.2).
(c) Identification of appropriate service for painting and marking (see 18.104.22.168).
(d) Concealed markings, if required (see 22.214.171.124).
(e) Rustproofing, if required (see 126.96.36.199).
(f) Tropical rustproofing, if required (see 188.8.131.52).
(g) Trailer towing package, if required (see 184.108.40.206).
(h) Tool box, if required (see 220.127.116.11).
(i) Satisfactory operation on JP-4, JP-5 and JP-8 fuels, if required (see 18.104.22.168).
(j) Gasoline engine driven vehicle. if required (see 22.214.171.124).
(k) Silicone rubber radiator and heater hoses. if required (see 126.96.36.199).
(l) Power plant heaters and fuel warmers, if required (see 188.8.131.52).
(m) A fuel fired engine preheater, if required for a diesel engine driven vehicle
(n) Vernier throttle control, if required (see 184.108.40.206).
(o) Starting motor circuit breaker, if required (see 220.127.116.11).
(p) Alternator capacity, if not as specified (see 18.104.22.168).
(q) A spark arrester, if required (see 22.214.171.124).
(r) Manual transmission, if required in lieu of automatic (see 3.4.5).
(s) Auxiliary rear springs, if required (see 3.4.8).
(t) Two speed axle, if required (see 126.96.36.199).
(u) Traction control, if required (see 188.8.131.52).
(v) Disc type wheels, if required (see 3.4.10).