Click here to make tpub.com your Home Page

Page Title: Type IV speed ends
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Hose reel shutoff valve
Up
Trucks, Tank: Fuel Servicing and Aircraft Fuel Servicing, 1,000 to 4,000 Gallon Diesel and Gasoline Engine Driven
Next
Body mounting



img
MIL-T-62032H
3.9.3 Type IV speed ends. Two sets of speed ends, identical to those specified in
3.5.23.1, shall be furnished.
3.9.4 Type IV dual ground cable reels. Dual ground cable reels, each conforming to
3.5.24.1, shall be installed in the underslung cabinets near the dispensing hose reels on the
driver's side of the truck.
3.9.5 Type IV dual fueling. Type IV vehicles shall be furnished with a dual fueling
system. The dual fueling system shall consist of a complete and separate fuel servicing and
loading system for each tank compartment. Each fuel servicing and loading system shall be
capable of operating independently but not simultaneously.
3.9.5.1 Type IV dual hose reel. Two hose reels, hoses and sets of nozzles shall be
furnished and mounted on the driver's side of the vehicle in the underslung cabinets. Each reel,
hose and nozzle shall conform to the requirements of 3.8.1 through 3.8.2.3.
3.9.5.2 Type IV dual pump installations. Two power takeoff driven fuel pump
installations shall be provided (one for each tank compartment), each conforming to 3.8.3
through 3.8.3.2.
3.9.5.3 Type IV pumping system operation. Pumping system operation shall be as
specified in 3.8.4 through 3.8.4.5 for each pumping system, except that only one system is
required to operate at a time.
3.9.6 Type IV product fuel system components. Two sets of fuel system components
shall be provided, each set conforming to the requirements of 3.8.5 through 3.8.5.5.
3.9.7 Type IV dual filter/separators. A separate filter/separator shall be provided for
each fuel system. Each filter/separator and its accessories shall conform to 3.8.6 through 3.8.6.6.
Both filter/separators shall be mounted on the side of the vehicle opposite the driver's controls in
the underslung cabinet.
3.9.8 Type IV dual contamination monitors. A separate contamination (fuel quality)
monitor shall be provided for each product fuel system and shall conform to the requirements of
3.8.7. Both monitors shall be mounted on the side of the vehicle opposite the driver's controls in
the underslung cabinet.
3.9.9 Type IV meters. A meter shall be furnished for each fuel system. Both meters
shall be mounted on the driver's side in an underslung cabinet and shall conform to 3.8.8.
3.9.10 Type IV product flow control system. Separate product flow control systems for
each tank compartment shall be furnished. Each system shall conform to 3.8.9 through 3.8.9.5.
The control panel and throttle may be common to both systems.
49

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +