 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62032H
(f)
Rustproofing, if required (see 3.1.1.3).
(g)
Tropical rustproofing, if required (see 3.1.1.3).
(h)
Silicone brake fluid, if required for class A vehicles (see 3.1.1.8).
*
(i)
Satisfactory operation on JP-4, JP-5 and JP-8 fuel, if required (see 3.4.1.1).
(j)
Gasoline engine, if required for classes 16, 19 and 28 (see 3.4.1.2).
(k)
Power plant heaters and fuel warmer, if required (see 3.4.1.8).
(i)
If a battery heater is not required with the power plant heaters (see 3.4.1.8).
*
(m)
Alternator capacitor, if other than as specified (see 3.4.2.3).
(n)
Two-speed transfer case, if required (see 3.4.5.1).
(o)
Automatic transmission for type I, III and V vehicles, if required (see 3.4.5.3).
(p)
Oil lubricated wheel bearings and axle spindles, if required (see 3.4.9).
(q)
Two-speed axle for model 4x2 vehicle, if required (see 3.4.9.1).
(r)
Traction control, if required (see 3.4.9.2).
(s)
Wide base tires, if required (see 3.4.10).
(t)
Disc type wheels, if required (see 3.4.10).
(u)
Bias ply or other type tires, if required (see 3.4.10.1).
(v)
A carrier for a spare tire assembly, if required (see 3.4.10.3).
(w)
Spare wheel or rim, if required (see 3.4.10.4).
(x)
Spare tire, if required (see 3.4.10.5).
(y)
Brake controls for use from a towing vehicle, for vehicle with air brakes, if required
(see 3.4.11.3).
(z)
Tilting hood and fender assembly, if required (see 3.4.12).
(aa)
Tilt cab, if required (see 3.4.12).
(ab)
Individual seats, if required (see 3.4.12).
(ac)
Tools, if required (see 3.4.17.1).
(ad)
Air horn, in addition, if required (see 3.4.22).
(ae)
2-inch NPT couplings and plug, if required (see 3.5.9).
(af)
Type of bottom loading adapter required, if not Y-type (see 3.5.14).
(ag)
Spotlight, if required (see 3.5.19.2(d)).
(ah)
Filter/separator for type I vehicle, if required (see 3.6).
(ai)
Automatic shut-off nozzle, if required (see 3.6.1.2).
(aj)
The specific fuel the meter is to be calibrated for, if required (see 3.6.3).
(ak)
Filter/separators for type II vehicle, if required (see 3.7.1).
6.3 Performance prediction. SAE Truck Ability Prediction Procedure computations and
computations for low speed and maximum geared speed will be required by the contract. The
SAE Work Sheet Item 1 should include vehicle model number, engine model number, and
vehicle type, class and model. Unless other conditions are cited in the contract, computations
should be made for normal atmospheric pressure, normal ambient air temperature, and still dry
60
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals