Click here to make tpub.com your Home Page

Page Title: Controls and operating mechanisms
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Windshield wipers and washers
Up
Trucks: Elevating Body, Diesel and Gasoline Engine Driven, 21,000 to 39,500 Pounds GVW, 4x2 and 6x4 Commercial
Next
Chassis mounted rear winch (type I, stake and platform)



img
MIL-T-62145E
The jack, without blocking, shall be capable of raising any wheel of the loaded vehicle to a
height adequate to permit removal and replacement of a wheel and tire assembly.
3.4.17 Heater and defroster. The vehicle shall be provided with a hot water heater with fresh
air intakes and discharge outlets to the floor and to windshield defroster louvers. The heater
shall be complete with blower and mounted controls convenient to the driver.
3.4.18 Controls and operating mechanisms. All controls and operating mechanisms shall be
located for left-hand drive. Controls shall be complete and conveniently operable by the driver.
Lever controls shall be designed and located to permit easy entrance and exit of the operator to
and from the driver's compartment. Instruments and controls shall be identified as to their
function and installed in a manner to facilitate removal and servicing. All instruments shall be
visible to the driver when seated in the driving position.
3.4.19 Accessories and equipment. Chassis equipment shall be complete with all accessories
furnished as standard equipment by the manufacturer. The following minimum equipment shall
be furnished:
(a)
Key-operated ignition switch
(b)
Ammeter, charging indicator, or voltmeter
(c)
Fuel gage
(d)
Oil pressure gage or red indicator warning light
*
(e)
Engine temperature gage or high coolant temperature or low coolant level red
indicator warning light
*
(f)
High coolant temperature or low coolant level alarm buzzer
(g)
Speedometer with recording odometer
(h)
Ash receptacle
(i)
Dual sunvisors
(j)
Front door mounted armrest on driver's side
(k)
Driver's compartment ventilator other than window
(l)
Tachometer.
*  3.4.20 Rearview mirrors. Outside rearview mirrors shall be mounted on each side of the
cab. The mirrors shall be of the combination type having flat and convex areas enclosed in a
common housing. The flat portion shall have not less than 50 square inches of reflective area.
The convex portion shall have not less than 25 square inches of reflective area. The mirrors shall
have not less than two supporting arms.
3.4.21 Horn. The manufacturer's standard electric horn shall be furnished. When specified
(see 6.2), in addition, an air operated horn shall be provided.
21

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +