 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62320C
* 3.1.1.11 Brushguard. Model 4x4 vehicles shall be equipped with a radiator and headlamp
brushguard.
* 3.1.1.12 4x4 conversion. The chassis manufacturer's standard 4x2 truck chassis may be
modified to provide all wheel drive conforming to the requirements specified herein if:
(a)
The conversion axle manufacturer's engineering department specifically approves and
certifies that all such modifications meet the design requirements and standards of the
conversion axle manufacturer. Certification shall be based on both design analysis and
proving ground test reports, which shall be made available to the engineering and
quality assurance offices of the procuring activity.
(b)
The chassis manufacturer's front axle before conversion has the same load rating as the
conversion axle to be installed.
(c)
Components used in the all wheel drive conversion are of current production.
(d)
Components used in the all wheel drive conversion are approved for the conversion
application by the component manufacturers.
(e)
The converted vehicle is certified to conform to Federal Motor Vehicle Safety Standard
No.121, by the intermediate or final manufacturer.
(f)
Replacement headlights, if required to be added to meet the height requirements of
Federal Motor Vehicle Safety Standard No. 108, are equivalent in mounting, protection,
and range and precision of adjustment to the chassis manufacturer's original standard
headlights.
(g)
Unused headlight cavities are covered in a neat workmanlike manner, treated and
painted to match the chassis cab color with treatment and painting equivalent to the
chassis cab manufacturer's process for the remainder of the chassis cab. Cavities and
their covers shall be rustproofed in accordance with 3.1.1.2.
(h)
Complete installation drawings are available to the procuring activity.
* 3.1.1.13 Brake lights. At least one pair of brake lights shall override the four-way
emergency flasher. Modifications to the manufacturer's standard product to accommodate this
requirement shall not compromise conformance to any Federal Motor Carrier Safety Regulation
referenced herein or to any Federal Motor Vehicle Safety Standard. If additional lights are added
to the vehicle, the lights shall be selected from the chassis manufacturer's standard matching
hardware.
3.2 General design.
3.2.1 Federal Motor Vehicle Safety Standards. The vehicle and furnished accessories shall
comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals