 |
|||
|
Page Title:
Standard vehicle and accessories |
|
||
| ||||||||||
|
|  MIL-T-62491C
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document shall take precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.17, the
vehicle, components, assemblies, and accessories to be delivered under the contract shall be
standard or optional items which meet or exceed the requirements of this specification. Except as
specified in 3.1.1 through 3.1.1.17, no removal, substitution or alteration of the chassis
manufacturer's standard or optional chassis components shall be made. All chassis items shall be
as represented in the chassis manufacturer's technical data book. Special bodies or mounted
equipment shall be as represented in the body and equipment manufacturer's technical data.
Technical data shall be limited to specifications and technical material identical to that furnished to
the authorized company representatives for selection of vehicle models and components, and shall
be available to the engineering office of the procuring activity prior to delivery of the items. The
chassis model furnished shall be not older than the chassis manufacturer's current model on the
date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified in
3.1, the vehicle shall be furnished with special equipment as specified herein.
3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance with
MIL-STD-1223. As specified by the procuring activity for the appropriate military service
(see 6.2), the exterior color shall be in accordance with MIL-STD-1223.
3.1.1.2 Markings and data plates. As specified by the procuring activity for the appropriate
military service (see 6.2), identification markings and data plates shall be in accordance with
MIL-STD-1223. When specified (see 6.2), concealed markings shall be furnished.
3.1.1.3 Rustproofing. When specified (see 6.2), the vehicle shall be rustproofed in
accordance with FED-STD-297. When specified (see 6.2), tropical rustproofing in accordance
with FED-STD-297 shall be furnished.
3.1.1.4 Drain plugs. Drain plugs installed in manual transmissions and rear axles shall be of
the permanent magnet type.
* 3.1.1.5 Towing devices. Towing devices consisting of two hooks, loops, eyes or pins or the
manufacturer's single center mounted eye or pin shall be mounted on the front of the vehicle. In
addition, towing devices shall be mounted on the rear of the vehicle. All towing devices shall be
frame rail mounted or reinforced back to each frame rail.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals