 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62491C
*
(s)
Starting motor circuit breaker, if required (see 3.4.2.1).
(t)
Alternator capacity, if other than as specified (see 3.4.2.3).
(u)
Auxiliary 24-volt system with trailer receptacle, if required (see 3.4.2.7).
*
(v)
Fuel and water separator, if required (see 3.4.3.3).
*
(w)
A spark arresting muffler. if required (see 3.4.4.1).
(x)
Automatic transmission, if required (see 3.4.5.3).
(y)
Two-speed transfer case for models 4x4 and 6x6, if required (see 3.4.5.4).
(z)
Two-speed axle for models 4x2 and 6x4, if required (see 3.4.9.2).
(aa)
Traction control, if required (see 3.4.9.3).
(ab)
Wide base tires and wheels, if required (see 3.4.10).
(ac)
Disc type wheels, if required (see 3.4.10).
(ad)
Bias ply tires, if required (see 3.4.10.1).
*
(ae)
Low profile tires, if required (see 3.4.10.1).
(af)
Spare wheel or rim, if required (see 3.4.10.4).
(ag)
Spare tire assembly, if required (see 3.4.10.5).
(ah)
Brake controls for use from a second towing vehicle, if required (see 3.4.11.4).
*
(ai)
Increased braking capability, if required (see 3.4.11.5).
(aj)
Tilting hood and fender assembly, if required (see 3.4.12).
(ak)
Tilt type cab, if required (see 3.4.12).
*
(al)
Intermittent windshield wipers, if required (see 3.4.14).
(am)
Tools, if required (see 3.4.17.1).
*
(an)
Remote control curbside rearview mirror, if required (see 3.4.21).
*
(ao)
Heated rearview mirrors, if required (see 3.4.21).
(ap)
Air operated horn, in addition, if required (see 3.4.22).
(aq)
Air conditioning, if required (see 3.4.25).
*
(ar)
Front mounted winch, if required (see 3.4.26).
*
(as)
AM/FM radio, if required (see 3.4.27).
*
(at)
Cooling system protection down to -54C (-65F), if required (see 3.4.28.1).
(au)
Extended boom for sizes 40T and 45T, if required (see 3.5.1).
(av)
If rear spades are not required on type I (see 3.5.10).
(aw)
Wheel-lift towing device, type I hydraulic wrecker only, if required for size 25T
(see 3.5.12).
(ax) Automobile towing sling, if required for sizes 35T, 40T and 45T (see 3.5.13(h).
(ay) Hydraulic fluid type MIL-H-83282, if required (see 3.5.15.3).
(az) Rear mounted winch, if required (see 3.6.14).
6.3 Performance prediction. SAE Truck Ability Prediction Procedure computations and
computations for low speed and maximum geared speed will be required by the contract. The
SAE Work Sheet Item 1 should include vehicle model number, engine model number, and vehicle
type, class, size and model. Unless other conditions are cited in the contract, computations
should be made for normal atmospheric pressure, normal ambient air temperature, and still, dry
47
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals