 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-740G
6.8 Boom marking. Boom markings shall be as follows:
a. On driver's side only, scribe and paint a 3/4 inch vertical stripe along the outer edge
of shipper. Extend the strip over onto boom, with the boom retracted and retained in
horizontal position.
b. To the right of and parallel with the first stripe label "11 1/2 Ft" in 2 inch letters.
c. Pain a horizontal 3/4 X 6 inch long arrow on the shipper pointing to the edge of the
first stripe.
d. Extend boom to the maximum length. The second stripe shall be scribed and painted
6 inches to the left of the "11 1/2 Ft" stripe. The 12 foot stripe and each succeding
stripe shall be scribed, painted and labeled consecutively at one foot intervals along
the boom through "19 ft."
e. The extension shall be striped at one foot increments with its retracted position to its
fully extended position but will not be labeled with number designations. The
number of stripes visible on the extension shall be added to the number of feet
indicated on the boom to establish the total number of feet the complete boom is
extended.
6.9 Kits. When required by the services, the following GFE special purpose or accessory
kits are available through normal supply channels when required for a specific vehicle.
Fording kits
Group
Kit
Vehicle model(s)
Nomenclature
1
5701841
M51 & M61
Kit, Deep Water
Fording
5701842
M52
Kit, Deep Water
Fording
5702843
M54 & M55
Kit, Deep Water
Fording
2
5703702
All vehicles except the
Kit, Deep Water
Fording
M543A2 and M139A2F
Kit, Deep Water
Fording
570703
M543A2
Kit, Deep Water
Fording
5702844
M139A2F
Kit, Deep Water
Fording
43
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals