 |
|||
|
Page Title:
Indicator Control Support Structure |
|
||
| ||||||||||
|
|  MIL-T-81527B(AS)
3.4.1.6.4.2.4 Indicator Control Support Structure.
3.4.1.6.4.2.4.1 Function.
This structure shall support the Indicator Con-
trol and shall be attached to the lower surface of the overhead shelf.
3.4.1.6.4.2.4.2 Form Factor.
This unit shall fasten to the underside of
the shelf and support the indicator Control from its normal mounting fixtures.
Nominal dimensions shall be 17 inches by 8 inches by 12 inches. The weight
of this unit shall not exceed 8 pounds.
3.4.1.6.4.2.5 Test Set Support Structure.
3.4.1.6.4.2.5.1 Function.
The Test Set Support Structure shall support
the MCS Test Group OQ-50A/AWM-21 below the. .top shelf at the left side of
the Mechanical Support Structure when the Test Set is used to perform tests
on LRU's of the AN/APG-59 Radar Set which are normally serviced at the
Indicator Test Bench and the Computer Test Bench. The structure shall
support the Test Set so that it can be viewed from several angles in eleva-
tion and azimuth for ease in use.
3.4.1.6.4.2.5.2 Form Factor.
The Test Set Support Structure shall not
exceed 21 inches by 12 inches by 16 inches and shall weigh not more than
25 pounds.
The structure shall be in the form of a yoke assembly designed .
to permit rotation and locking of the Test Set in elevation and azimuth.
3.4.1.6.5 Computer Bench.
The Computer Bench shall mount and furnish an
3.4.1.6.5.1 Function.
operating environment for the AN/APG-59 Radar Set Launch, Pilot Command
and Velocity Signal Computers, and provide suitable working space for
necessary testing and repair.
3.4.1.6.5.2 Form Factor. The Computer Bench shall not exceed 28- 1/8
inches by 28 inches by 75 inches and the weight shall not exceed 225 pounds.
The Computer Bench shall consist of the following items:
(a) Mechanical Support Structure.
(b) Computer Support Structure.
44
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals