 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81527B(AS)
3.4.1.6.8.2.4 Service Conditions. The equipment shall operate satisfac-
torily under any of the environmental service conditions or reasonable
combination of these conditions as specified in MIL-H-15362.
3.4. 1.6.8.3 Stalo Extension Kit.
The Stalo Extension Kit shall permit operation of
3.4.1.6.8.3.1 Function.
the RF 0scillator, when it is removed from the system on the table-rack
and placed on the bench table top for maintenances
The Stalo Extension Kit shall consist of an
3.4.1.6.8.3.2 Form Factor.
electrical Patch Cable Assembly and an Air Adapter.
The Patch Cable Assembly shall
3.4.1.6.8.3.2.1 Patch Cable Assembly.
It shall connect the RF Oscillator to the sys-
be a cable 36 + 1 inches long.
tern via connectors 3J1 and 3P1, 3J2 and 3P2, 3J3 and 3P3, 3J4 and 3P4,
These connectors shall be wired pin to pin with wire per
and 3J5 and 3P5.
MIL-W-16878 and RG-195/U subminiature coaxial cable per MIL-C-17/70
as required.
The Air Adapter shall not exceed 65 + 1 inches
3.4.1.6.8.3.2.2 Air Adapter.
in length and shall furnish cooling air to the RF 0scillator, from the Plenum
Chamber on the Pallet Bench.
3.4.1.6.8.4 Kit, Waveguide Shelf Extension .
The Waveguide Shelf Extension Kit shall provide
3.4.1.6.8.4.1 Function.
the means by which the Receiver Waveguide Assembly and the Transmitter
Waveguide Assembly of the AN/APG-59 Radar Set and the components
mounted thereon are made accessible for adjustment, servicing, and main-
The Waveguide Shelf Extension Kit is replaceable by the Waveguide
tenance.
Extension MX 849l/AWG-10 and in some locations the Radar Maintenance
Some cables from the Waveguide Shelf
Table-Rack will be so configured.
Extension Kit are retained when replacing it with the Waveguide Extension.
57
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals