 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81527B(AS)
Function
Reference Designation
Launch Signal Computer
16P1
Launch Signal Computer
16P2
Launch Signal Computer
6
16P3*
Pilot Command Signal Computer
8
17P1*
Pilot Command Signal Computer
17P2
Pilot Command Signal Computer
17P3
Connection to the System Harness shall be made through the following
connectors using the same pin designators as the corresponding connectors
of the AN/APG-59.
Function
Reference Designation
*6, *7, *8
Radar Main
7 J1
7J2*6 & *8
Radar Main
BIT Main
7J3
BIT Main
*8
7,J4
Simulated Doppler Main
7J6
3.4.1.6.11 System Harness.
3.4.1.6.11.1 Function. The System Harness shall replace the Rack, Elec-
trical Equipment (LRU7) wiring harness which interconnects the AN/APG-59
Radar Set LRU's installed on the Barrel Assembly, and shall provide elec-
trical interconnection between these LRU's, the table -rack and the Inter -
.
connecting Test Harness*
The System Cable Harriess shall extend
3.4.1.6.11.2 Form Factor.
throughout the R. F. Section Support Assembly and the Receiver Section
Bench Assembly to interconnect the AN/APG-59 Radar Set Barrel Assembly
The System Harriess shall connect directly to the Interconnecting
LRU's.
Cable Harness at the Interconnecting Test Harness Shelf to form an inter-
face with the table-rack and the remaining AN/APG-59 LRU'S installed
thereon.
*6 See paragraph 6. 5.6
*7 See paragraph 6. 5.7
*8 See paragraph 6. 5.8
FSC 1270
67
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals