 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81527B(AS)
(c) 19 dB Switch- The 19 dB switch shall interpose a fixed attenuation
of 19 dB between the X-Band Sweep Generator and the Receiver inputs when
the Mode Select is in the PARAMP position.
(d) 17 dB Switch - The 17 dB switch shall interpose a fixed attenuator
of 17 dB into the input path of the Auxiliary Receiver channel when the Mode
Select is in the PARAMP position.
(e) VIDEO SYNC Switch - The VIDEO SYNC shall allow the selection
When
of either the DSA or the B-Gun Video oscilloscope presentations.
the Mode Select is in position O, 40 or 79 and the REF Switch is activated, it
allows the operator to choose between Pulse and Pulse Doppler Modulation.
3.4.3.5.2.3.1
Form Factor,
The Microwave Control Panel shall be
approximately 5.25 x 9 inches.
3.4.3.5.2.4
Diode Gate Drive r
Function. The Diode Gate Drive r shall furnish Diode Gate
3.4.3.5.2.4.1
and Stalo Gate control signals fox the three modes of operation of the WE.
The Diode Gate Driver shall consist of a
Form Factor.
3.4.3.5.2.4.2
plug -in printed wiring component board approximately 4.3 x 6 inches.
Interfacing Cables
3.4.3.5.3
The interfacing cables shall provide those inter -
Function.
3.4.3.5.3.1
connections between the LRU's of the AN/APG-59 Radar set and the WE that
are not provided for by the Microwave Structure wiring harriess.
Form Factor.
The form factor of the Interfacing Cables shall
3.4.3.5.3.2
be such that all necessary interconnections are made without permanent ( solder)
Interfacing connectors shall be compatible with the mating
type connections.
connectors of the AN/APG-59 and the Centerline or Side Benches. These
cables shall conform to MIL-H-15362 and shall be color coded in conformance
with MIL-STD- 681 where applicable.
Installation Kit.
3.4.3.5.4
83
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals