 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81527B(AS)
4. QUALITY ASSURANCE PROVISIONS
4.1 General.
Equipments shall be subjected to the following tests to determine
compliance with all the applicable requirements.
(a) Preproduction Tests
(b) Acceptance Tests
(c) Life Tests
NOTE: Unless otherwise specified in the contract or purchase order, the
supplier is responsible for the performance of all inspection re-
quirements as specified herein. Except as otherwise specified,
the supplier may use his own facilities or any commercial labor-
atory acceptable to the Government, The Government reserves
the right to perform any inspection set forth in the specification
where such inspections are deemed necessary to assure supplies
and services conform to prescribed requirements.
4.2 Preproduction Tests.
Preproduction tests shall be made on one or more.
equipment representative of the production equipments to be supplied under
Preproduction tests shall consist of the following:
the contract.
(a)
Contractor's
Demonstration
Tests
(b) Service Approval Tests
Contractor's demonstration tests
4.2.1 Contractor's Demonstration Tests.
shall be accomplished uncle r the responsibility of the contractor and shall be
conducted in accordance with the approved test procedure of section 4.5
The Government Inspector and the procuring activity shall be advised when
tests are to be conducted so that a representative may be designated to
witness the tests when so desired.
Contractors not having adequate facili-
ties to conduct all required tests shall obtain the service for a commercial
testing laboratory satisfactory to the procuring activity.
4.2.2 Service Approval Tests.
At the completion of the contractor's
demonstration test and when requested by the procuring activity the
equipment shall be delivered to the Government for additional testing. This
additional testing may consist of duplicating tests previously conducted and
other test necessary to determine compliance with all applicable design
and performance requirements.
86
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals