 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81782C(AS)
3.4.2.6.10 Training. The CTS shall test
LTC input and output signals
when in the training select mode.
3.4.2.6.11 Target doppler reference frequency (TDRF). The CTS shall have
the capability of testing the TDRF function of the AIM-54A Missile.
3.4.2.6.12 Dc analog functions. The CTS shall have the capability of
testing the dc analog functions associated with the AIM-54A and AIM-7
Missiles.
3.5 Workmanship.
Applicable.
3.6 Elements.
3.6.1 Console, Test, Computer OJ-256( )/AWM-23(V). The computer test
console (bay no. 1) shall provide the test capabilities for testing the
missile auxiliaries WRAS and the PS/S.
3.6.1.1 Dummy Load, Electrical DA-633( )/AWM-23(V). The electrical
dummy load shall provide resistive loads for testing the PS/S.
3.6.1.2 Panel, Test, Electrical C-9180( )/AWM-23(V). The electrical
test panel shall have the switches, controls, and monitoring capabilities
required for test of the PS/S. Indicators shall be provided to allow
constant monitoring of the prime power and the bulk store status of the
PS/S. Switches shall be provided to facilitate testing the bulk store
functions and troubleshooting the power supply functions.
3.6,1.3 Mounting MT-4504( )/AWM-23(V). The WRA mounting shall be a
dual mounting used in three test configurations. When testing an LTC
the relay matrix loop test adapter shall be stored in bay no. 4 and the
mounting shall hold the LTC and the missile auxiliaries simulator and
shall provide the interfaces between the CTS and these units. When test-
ing a signal data converter, the missile auxiliaries simulator and the
relay matrix loop test adapter shall be stored in the WRA stowage area
provided in bay no. 4 and the signal data converter shall be installed in
its place on the mounting. The mounting shall provide the interface be-
tween the CTS and the signal data converter under test. When neither
the signal data converter nor LTC is being tested, the mounting shall
hold the missile auxiliaries simulator and the relay matrix loop test
adapter for self test.
3.6.1.4 Simulator, missile auxiliaries. The missile auxiliaries
simulator shall be used when testing an LTC (3.6.1.3). The simulator
shall provide all of the interfaces normally seen by an LTC when opera-
ting in the missile auxiliaries subsystem.
3.6.1.5 Power Supply Assembly PP-6851( )/AWM-23(V). The power supply
assembly shall contain modular type power supplies to provide the power
forms required for the signal data converter and LTC, and also the missile
auxiliaries test logic.
-14-
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals