Click here to make tpub.com your Home Page

Page Title: Adapter, power supp ly and bulk store - loop test
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-81782C(AS)
3.6.2.6 Adapter, power supp ly and bulk store - loop test.  The power
supply and bulk store loop test adapter shall provide the circuitry to
test the CT'S interfaces utilized to test a power supply storer.  When a
data processor is to be tested, the adapter shall be located on Mounting
MT-4505( )/AWM-23(V).  When a PS/S is to be tested, the adapter shall be
stored in the WRA stowage area provided in bay no. 4.
3.6.2.7 Switching Unit, Fault Isolation SA-1898( )/AWM-23(V). The
fault isolation switching unit shall contain relays that switch signals
to the counter-timer or DRVM under computer control.
3.6.2.8 Simulator, Electronic Command Signal Generator SM-659( )/
AWM-23(V).  The electronic command signal generator simulator shall con-
tain the circuits and switching networks required for simulation of the
Weapon Control System (WCS) and avionics/data processor interface.
3.6.3 Console, Test, Computer 0J-258( )/AWM-23(V).  The computer test
console (bay no. 3) shall operate in conjunction with bay no. 2 to provide
test positions for testing of the computer subsystem WRAs.  The bay shall
also provide the control logic for controlling the functional operation
of the station.
3.6.3.1 Oscilloscope.  An oscilloscope, Hewlett-Packard 180AR/1801A-90/
1821A, or equivalent, shall be supplied and shall provide the capabilities
required for waveform analysis when manually testing the WRAs and for per-
forming station maintenance tests.
3.6.3.2 Panel, Test, Electrical C-9181(
)/AWM-23(V). The electrical
test panel shall provide control functions
for testing the digital com-
puter and shall have a keyboard for manual
entry of data into-the com-
puter. The panel shall provide indications
of status of the tape reader
and the computer.
3.6.3.3 Mounting MT-4506( )/AWM-23(V).  The mounting shall hold the
digital computer WRA and shall provide the interfaces between the CTS
and this WRA.  A slave digital computer shall be in this mounting when
a tactical digital computer is not under test.  When a tactical digital
computer is being tested, the slave digital computer shall be stored in
the WRA storage area provided in bay no. 4.
3.6.3.3.1 Computer, Digital CP-1159( )/AWG-9. The slave digital com-
puter shall perform the functions of a central processor for the test
station.  Normally this slave digital computer will be mounted in the WRA
mounting.  When a tactical digital computer is to be tested, this slave
digital computer will be stowed in the storage location of bay no. 4.
3.6.3.4 Mounting MT-4507( )/AWM-23(V).  The WRA mounting shall be
capable of holding either the memory unit or the memory  unit simulator
and shall provide the interfaces between the CTS and either device.
-16-

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business