QUALITY CONFORMANCE INSPECTION
TORPEDO TUBE MARK 32 MOD 9, Equipment Serial No.
10.1 This appendix contains data sheets to record the results of the
quality conformance tests and examinations of 4.4 of this specification.
When completed, with authorized certification and acceptance signatures
affixed, this report form or copies thereof shall accompany the Torpedo
Tube Assembly bearing the recorded equipment serial number.
20.1 Test sequence. When the contract or order specifies use of this
the Quality Conformance Inspection tests of 4.4 shall be com-
pleted and the results recorded or verified in these data sheets prior to
acceptance of the Torpedo Tube Assembly. Unless otherwise noted, the se-
quence of testing procedures presented herein is suggested only. The pro-
cedures may be performed in any order which will permit the most practical
and economical use of manpower and equipment.
20.2 Recording of results. Where space is provided in the "Reading"
column of the Quality Conformance Test data sheets, the value or specific
reading obtained shall be recorded and the initials of the individual per-
forming the inspection shall be inserted above the value observed and re-
corded. If limits are not stated, the individual performing the test or
inspection shall initial in the space provided in the "Reading" column
indicating that the requirements have been met satisfactorily.