 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-83808
(84)
Test rejection criteria Throughout all tests specified herein, the vehicle shall be closely
4.3.4
observed for the following conditions, which shall be cause for rejection:
a. Failure to conform to design or performance requirements specified herein.
b. Spillage or leakage of any liquid, including fuel, coolant, lubricant, or hydraulic fluid, under
any operating condition, except as allowed herein.
c. Structural failure of any component, including permanent deformation, or evidence of in-
pending failure.
d. Evidence of abnormal wear.
e. nterference between vehicle components or between the vehicle, the ground, and all re-
quired obstacles, with the exception of normal contact by the tires.
f. Misalignment of components.
g. Evidence of undesirable readability characteristics, Including instability in handling during
cornering, braking, and while traversing rough terrain.
h. Conditions which present a safety hazard to personnel during operation, service, or main-
tenance.
i . Overheating of the engine, transmission, or any other vehicle component
First article testing.
4.4
4.4.1
First article test samples. The first article test samples shall be identical to the items procured
under the terms of the contract. Approval of the first article test report shall not constitute a waiver by the
Government of its rights under the provisions of the contract. Two first article samples shall be produced
and tested as follows:
a Contractor test sample (see 4.4.2.1)
b User test sample (see 4.4.2.2)
i
4.4.2
First article tests.
4.4.2.1
Contractor test sample. The contractor test sample shall be subjected to the tests described
in 4.6.1 through 4.6.11. All tests, with the exception of 4.6.7.8, shall be run using JP-8 fuel conforming to
MIL-T-83133
4.4.2.2
Use test sample. The user test sample shall successfully complete the tests in 4.6 1 through
4.6.11 prior to being shipped to the user test facility for the test described in 4.6.12.
4.4.3
Notifications of tests. The procuring activity shall be notified of the time and location of all first
article tests so that representatives of the procuring activity may attend. The notification shall be in writing
and shall include the nomenclature and the National Stock Number (NSN)
4.5
ce testing Acceptance testing shall be classified as follows.
a Individual testing (see 4.5.1),
b. Random sample testing (see 4.5.2).
c. Road test (production vehicle) (see 4.5.3)
All defects identified shall be corrected prior to acceptance
4.5.1
dividual testing Each production vehicle shall be subjected to the tests specified in 4.6.1,
4.6.2, 4.6.3, and 4.6.4.
4.5.2
Random sample testing. Any production vehicle, when specified (see 6 2), may be selected
by the procuring activity at any time to be subjected to the tests described in 4.6 except for 4.6.7.2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals