Click here to make tpub.com your Home Page

Page Title: Table I. Test set commands and associated VCO frequencies.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-85472A(AS)
Six of the VCOs shall be operated at fixed frequencies with the outputs
being applied to the mixer 1A4A2 when the appropriate switch on the data
test panel is pressed.  Table I lists the commands and associated VCO
frequencies.
3.6.5.1.19 Mixer amplifier (1A4A2).  The amplifier shall be a basic
operational amplifier capable of summing the VCO outputs.  The amplifier
shall be capable of summing 10 inputs but only eight shall be presently
used.  Again the potentiometer in the feedback path shall allow the
composite modulation signal amplitude to be adjusted to the proper level.
TABLE I. Test set commands and associated VCO frequencies.
The mixer output shall be connected to coaxial switch 1A4S15 for switching
to the transmitter 1A4TR1 or the Encoder Drawer Assembly 1A5. The mixer
dc.
shall be energized with
3.6.5.1.20 Transmitter  (1A4TR1).  The transmitter shall be a five channel
VHF FM transmitter.  The transmitter shall be frequency modulated by the
composite signal from the mixer amplifier 1A4A2. The transmitter shall
require +28V dc for heater supply and +28V dc for transmitter power on.  The
+28V dc for the heater supply shall be applied when DATA LINK is selected,
and the +28V dc power on is provided through the XMTR ON/XMTR OFF switch
1A4S4.
3.6.5.1.21 Coaxial switches (1A4S15 and 1A4S16). These coaxial switches
shall be activated by the TONE/DIGITAL switch 1A5S14 (in the Encoder Drawer
1A5) .  With switch 1A5S14 in the TONE position, the mixer output shall be
directed through 1A4S15 and 1A4S16 to the transmitter modulation input.
With 1A5S14 in the DIGITAL position, coaxial switch 1A4S15 shall direct the
mixer output to the Encoder Drawer 1A5 via cable W55.
3.6.6 Encoder drawer assembly.  The encoder assembly shall be manufactured
in accordance with DL412AS9000 and shall meet the requirements stated
thereon and in 3.6.6.1 through 3.6.6.1.6.
17

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business