 |
|||
|
|
|||
| ||||||||||
|
|  MIL-V-19067A(ASG)
(Copies of specifications, standards, drawings, and publications required by
contractors in connection with specific procurement functions should be obtained from the
procuring activity or as directed by the contracting officer.)
3.
REQUIREMENTS
3.1 General - The requirements specified in Specification MIL-H-8775 are
applicable as requirements of this specification. In the event the requirements of the
general specification and this specification conflict, the requirements of this
specification shall govern.
3.2 Qualification - The valves furnished under this specification shall be a
product which has been tested and has passed the Qualification tests specified herein.
QUALITY ASSURANCE PROVISIONS
4.
General - The qualification and acceptance provisions contained in section 4
4.1
of Specification MIL-H-8775 are applicable to, and form a part of this specification.
Additional provisions shall be as specified herein.
Test conditions-
4.2
Positioning - Unless otherwise specified} testing may be made with the valve
4.2.l
axes in either of the following positions:
(a) Horizontal
(b) Vertical - (The force of gravity acting opposite to the checking
action.)
4.3 Qualification tests - The Qualification tests described herein under
"Qualification test methods" shall be performed on the applicable specimen by the manu-
facturer and the activity responsible for qualification, in the order as indicated in
tables I and II, respectively. Tests may be supplemented with tests under actual service
conditions at the option of the procuring activity.
4.3.1 Requalification - Qualification approval based on evaluation of handmade
samples or models other than normal production samples shall be subject to requalification
as directed by the procuring activity. The manufacturer shall furnish the activity
responsible for qualification full particulars regarding changes in manufacturing processes}
product design, (including component parts thereof), and of resulting changes in performance
Results of tests conducted to prove the acceptability of such changes shall be furnished.
Submission of samples for evaluation shall be as directed by the activity responsible for
qualification when such changes are made or when conformance of the product to requirements
of this specification is questionable.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals