 |
|||
|
|
|||
| ||||||||||
|
|  MIL-V-24695/2A(SH)
Hose End
Major dia:
12.505 - 12.715
Fitting thread
Pitch dia:
(internal)
11.875 - 12.025
Mior dia:
11.375 - 11.485
2. Dimensions in millimeters and inches.
3. Materials shall be in accordancce with the general specification.
4
Tolerances plus or minus 0.2 mm (0.008 inch except as noted.
5
Hose length tolerance:
plus or minus 12 mm.
1.
Torque required to connect the hose to the vent and test valve shall not
exceed 2.0 Newton-Meters
inch/pounds with 310 bars (4,500
pressure on the valve.
2.
Hose ends shall be protected by plugs LO prevent thread damage and dirt
infiltration in accordance with MIL-C-5501.
3.
Part number:
The part number shall consist of the basic number of this
specification sheet plus A dash number indicating hose length.
Example
M24695/2-03 - 915 mm (36 inch) hose assembly
Preparing activity:
Navy - SH
(Project 4810-N083-02)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals