Standard Method of Salt Spray (fog) Testing

Page Title: Standard Method of Salt Spray (fog) Testing
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-V-46727C(AT)

(Copies of specifications, standards, handbooks, drawings, publications, and other

Government documents required by the contractors in connection with specific acquisition

functions should be obtained from the contracting activity or as directed by the contracting

activity.)

2.2 Other publications. The following document(s) form a part of this specification to the

extent specified herein. Unless otherwise specified, the issues of the documents which are DoD

adopted shall be those listed in the issue of the DODISS specified in the solicitation. Unless

otherwise specified, the issues of documents not listed in the DODISS shall be the issue of the

nongovernment documents which is current on the date of the solicitation.

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)

ASTM B117

- Standard Method of Salt Spray (fog) Testing.

(Application for copies should be addressed to American Society for Testing and Materials,

1916 Race Street, Philadelphia, PA 19103.)

(Nongovernment standards and other publications are normally available from the

organizations which prepare or which distribute the documents. These documents also may be

available in or through libraries or other informational services.)

2.3 Order of precedence. In the event of a conflict between the text of this specification and

the references cited herein (except for associated detail specifications, specification sheets or

MS standards), the text of this specification shall take precedence. Nothing in this specification,

however, shall supersede applicable laws and regulations unless a specific exemption has been

obtained.

3. REQUIREMENTS

3.1 First article. Unless otherwise specified (see 6.2), the contractor shall furnish valves

which shall be subjected to first article inspection (see 4.4). First article inspection samples,

properly marked with identifying information shall be representative of the valves to be

furnished to the Government. All subsequent valves delivered to the Government shall conform

to these samples in all of their pertinent physical and performance attributes.

3.2 Materials. Materials shall conform to the applicable requirements of MIL-V-5529.

Material not specifically designated shall be of such quality as to assure conformance of the

valve to requirements specified herein and in referenced specifications, standards, and drawings.

Material shall be free from defects which adversely affect performance of serviceability of the

finished product. Exposed functional parts shall be fabricated from suitable corrosion resistant

materials or treated to prevent corrosion (see 4.7.1 and 6.3).

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business