Click here to make tpub.com your Home Page

Page Title: Cupola weapon sighting system
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-V-62008B(AT)
3.6.16 Indirect fire control.
3.6.16.1 Elevation quadrant. At zero gun elevation and with the bubble centered in the
level vial, the knob scale and index scale shall be adjusted to read zero. The reading on the
quadrant shall correspond to the position of the gun within plus or minus 1 mil at all angles of
elevation and depression.
3.6.16.2 Azimuth indicator backlash. The backlash of the azimuth indicator shall not
exceed 0.5 mil in any position of the turret.
3.6.16.3 Leveling devices. The level on the ballistic drive shall be level within
15 minutes (three graduations) when the gun is at the boresight position.
3.6.17 Cupola weapon sighting system.
3.6.17.1 Synchronization. The periscope line of sight shall be synchronized with the
cupola machine gun so that the line of sight of the periscope maintains a given azimuth and
elevation relationship (established at horizontal gun position) with the centerline of the machine
gun bore within 1.8 mils at all gun positions between 10 depression and 30 elevation, and
within 3 mils at all gun positions between 30, and 50 elevation.
3.6.17.2 Backlash. The elevation backlash of the cupola machine gun sighting system
shall be not more than 0.6 mil at any position exclusive of machine gun free barrel movement.
3.6.17.3 Boresight knob travel. The boresight knobs on the periscope shall be adjustable
to a minimum of 5 mils down, 2 mils up, 4 mils left, and 4 mils right as measured from the
boresight position.
3.6.17.4 Boresight retention. The line of sight of commander periscope shall maintain
previously established boresight within 1.5 mils.
3.6.17.5 Interlock assembly location. The interlock assembly shall be located for
azimuth coincidence of the machine gun line of sight and the main armament line of sight at
600 meters within 2 mils.
3.6.18 Support equipment hydraulic control system.
3.6.18.1 Vehicle hydraulic control system. The vehicle hydraulic control system shall
control the operation of the bulldozer, winch, and boom, and shall meet all requirments specified
herein at an engine idle speed of 1100 rpm.
3.6.18.2 Boom. The boom shall be hydraulically raised from the travel locks to a
vertical position in not more than 45 seconds. The winch shall return the boom to within
6 inches of stowed position.
19

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business