 |
|||
|
|
|||
| ||||||||||
|
|  MIL-V-81995(AS)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
B46. 1-1962
Surface Texture
(Application for copies should be addressed to the American Standards
Institute, 1430 Broadway, New York, NY 10018.)
REQUIREMENTS
3.
3.1
Specification sheets. The individual item requirements
shall be as specified herein and in accordance with the applicable
specification sheets. In the event of any conflict between requirements
of this specification and the specification sheet, the latter shall
govern.
3.1.1
Precedence. The contract shall have precedence over
any specification. Any design or construction change that may effect
compliance with this specification or from subsidiary specifications or
standards, for a qualified valve, are subject to approval in writing by
the qualifying activity (see 3.11.3).
3.2
Qualification. The valve furnished under this
specification shall be a product which has been qualified for listing on
the applicable Qualified Products List at the time set for opening of
bids (see 4.2 9 and 6.4).
1.
bids
3.3
Dimensions. Each part shall conform to the dimen-
sions shown on the specification sheet. Where only maximum or minimum
dimensions are shown, the part need not have the shape shown, but the
part, including all protrusions, shall be contained within the outline
shown . Design details which are shown but are not specifically required
are shown as examples and for information only; such details are optional.
3.4
Data. Unless otherwise specified in the contract,
data cited in this specification is only required as part of the qualifica-
tion submittal.
Materials and parts. Materials and parts used In
3.5
construction of the valve shall be unaffected by aircraft engine oil
while the valve is operating under any of the specified conditions.
Materials, parts, and processes shall conform to applicable Government
specifications listed in MIL-BULL-544. Contractor or industry specifications
may be used for materials or processes not covered by the documents
listed in.MIL-BULL-544, provided the specifications are approved by the
qualifying activity and contain provisions for adequate tests.
3.5.1
Materials.
3.5.1.1
Toxic products. Materials which are toxic in themselves,
or which become toxic when pulverized or vaporized, or which have toxic
products of combustion, shall be used only upon written permission of
the qualifying activity.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals