Click here to make tpub.com your Home Page

Page Title: Temperature and humidity, nonoperation condition
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-V-82444A(OS)
4.6.3.5 Temperature and humidity, nonoperation condition.  Tempera-
ture and humidity testing of the valve, in the nonoperating condition,
shall be performed in accordance with 4.4.4.7.
*
4.6.3.6 No-fire current.  The valve shall be subjected to the no-fire
current test in accordance with 4.4.4.10.
4.6.3.7 Auto-ignition, low temperature.  The valve shall be subjected
to the auto-ignition, low temperature, test in accordance with 4.4.4.2.
4.6.3.8 Auto-ignition, high temperature.  The valve shall be subjected
to the auto-ignition, high temperature, test in accordance with 4.4.4.3.
4.6.3.9 Low temperature operating.  The valve shall be subjected to
the low temperature operating test in accordance with 4.4.4.8.
4.6.3.10 High temperature operating.  The valve shall be subjected
to the high temperature operating test in accordance with 4.4.4.9.
*
4.6.3.11 Firing current.  The valve shall be subjected to the firing
current test in accordance with 4.4.4.11.
*
4.6.3.112 Leakage at operating pressure, inlet and outlet ports, after
firing. The valve shall be subjected to the post firing leakage test
(inlet and outlet ports) in accordance with 4.4.4.14.
4.6.3.13 Flow, after firing.  The valve shall be subjected to the
flow test in accordance with 4.4.4.13.
*
4.6.3.14 Visual inspection, after firing.  The valve, after firing, shall
be subjected to visual inspection in accordance with 4.4.4.12.
4.6.4 Test data.  Test data shall be recorded in accordance with
4.4.5, as appropriate, and maintained as a part of the inspection record.
4.6.5 Determination of defect or failure. Failure of the valve to
successfully pass the tests in 4.6.3.1 through 4.6.3.14 shall be cause
for withholding acceptance of all units on hand.  Corrective action shall
be taken in accordance with 4.3.3.
*
5. PREPARATION FOR DELIVERY
(This section not applicable to this specification.)
6. NOTES
6.1 Intended use.  The valve is intended for use in a torpedo to
pressurize the torpedo engine fuel tank.
20

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business