MIL-STD-129 - Marking for Shipment and Storage.
(Copies of specifications, standards, drawings, and publications
required by contractors in connection with specific acquisition functions
should be obtained from the contracting activity or as directed by the
2.2 Other publications. The following documents form a part of
this specification to the extent specified herein. Unless otherwise
indicated, the issue in effect on date of invitation for bids or request
for proposal shall apply.
UNIFORM CLASSIFICATION COMMITTEE, AGENT
Uniform Freight Classification Ratings, Rules and Regulations
(Application for copies should be addressed to the Uniform Classifi-
cation Committee Agent, Tariff Publication Officer, Room 1106, 222 South
Riverside Plaza, Chicago, IL 60606.)
NATIONAL MOTOR FREIGHT TRAFFIC ASSOCIATION, INC. AGENT
National Motor Freight Classification
(Application for copies should be addressed to the National Motor
Freight Traffic Association, Inc., ATA TRAFFIC Dept., 1616 "P" Street.
N.W., Washington, DC 20036.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
A 611 - Steel, Cold-Rolled Sheet, Carbon, Structural, Specifica-
(Application for copies should be addressed to the American Society
for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
(Technical society and technical association specifications and stand-
ards are generally available for reference from libraries. They are also
distributed among technical groups and using Federal agencies.)
Material. Material shall be as specified hereinafter.
3.1.1 Recovered materials. Unless otherwise specified herein, all
equipment, material, and articles incorporated in the products covered
by this specification shall be new and shall be fabricated using materials
produced from recovered materials to the maximum extent practicable without
jeopardizing the Intended use. The term "recovered materials" means
materials which have been collected or recovered from solid waste and
reprocessed to become a source of raw materials, as opposed to virgin raw
None of the above shall be interpreted to mean that the use
of used or rebuilt products is allowed under this specification unless
otherwise specifically specified.