 |
|||
|
|
|||
| ||||||||||
|
|  MIL-W-52125B
permit interchange of the various makes of MS53004 valves. The hose ends of these lines shall
be identified by markers conforming to MS39020 near each fitting. Brakeline components shall
conform to the following:
(a) Flexible air hose - MIL-H-3992, type I, class l or 2.
(b) Rigid air line - SAE J844, copper tubing
(c) Fittings - SAE J512, heavy-duty airbrake, compression type, reusable.
Note: At the supplier's option, flexible air lines conforming to SAE J40, SAE 40R2, type E or F
may be furnished in lieu of the flexible air hose and rigid air lines specified in (a) and (b) above.
3.14.6 Vehicular electrical system. The unit shall be equipped with a waterproof, 24-volt
vehicular electrical system for service and blackout night travel. Except as specified herein, the
electrical system shall be in accordance with the following requirements:
(a)
SAE Handbook, Electrical Equipment and Lighting Section.
(b)
ICC Motor Carrier Safety Regulations.
(c)
TTMA Recommended Practice RP6-2-9.
(d)
ATA Specification E-3.
(e)
Figure 3.
All components and wiring shall be so located and guarded as to provide protection from
vibration, breakage, and damage from falling and flying aggregates. The electrical components
shall be in accordance with table III. Item quantities that are not specified shall be furnished as
required (AR) for each semitrailer.
Table III. Vehicular Electrical System
Quantity per
Description
Requirements
semitrailer
Service lights; clearance side-
MS35423
16 min.
marker, and identification
MS35424
8
Blackout lights; clearance and
side-marker
Service combination lights
Commercial SAE-SIT, 4-in.
2
dia., waterproof, double
contact (SAE J759)
MS51330 (Military)
2
Blackout combination lights
MS35387
Reflectors
10
Front trailer receptacle
MS75021-1 with matching
1
spring loaded 4-bolt
cover
24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals